Wireless - IoT › RF / RFID › Module

Module PN532 NFC RFID V3

Cập nhập: 2024-08-29 11:41:42

Đã bán: 122

Thương hiệu:

Loại hàng:

TQ sản xuất

- Hàng chưa qua sử dụng do Trung Quốc sản xuất.
- Hình thức: Mới
- Chất lượng: Có thể kém hơn hàng do chính hãng sản xuất
- Bảo hành: Không (nên kiểm tra với đơn mẫu)

Mã lưu trữ: B050609

Kho hàng: 12

Tư vấn:

Mua/Đặt hàng - Giá sỉ Kỹ thuật

Số lượng	1+	5+	10+
Giá / Bộ	81,000	80,500	80,000

Số lượng:

CHO VÀO GIỎ MUA NGAY SHOPEE LAZADA

Thông tin sản phẩm

Introdution:

PN532 NFC RFID Module is a highly integrated transmission module for Near Field Communication at 13.56MHz.
With the mode switch on board, you can change easily between I2C, SPI, and UART modes.
In addition, it supports RFID reading and writing, and NFC function with Android phone, which makes it quite convenient for wireless connection.
This module is equipped with two 3mm mounting holes, of which the small dimension makes it easy for using in your project!

Features:

Supports I2C, SPI and HSU (High Speed UART), easy to switch between these modes.
Works in the NFC mode and RFID reader/writer mode.
Maximum distance for communication: 3 cm.

Applications:

Media or Data sharing
Robotics
Smart Phones and Smart devices
Security systems
Computer Peripherals
Package Identification
Theft protection systems

PN532 NFC Module Features and Specifications:

80C51 microcontroller core with 40 Kbyte ROM and 1 Kbyte RAM
Highly integrated analog circuitry to demodulate and decode responses
Buffered output drivers to connect an antenna with minimum number of external components
Integrated RF level detector
Integrated data mode detector
RFID reader/writer mode support [MIFARE 1k, 4k, Ultra light, and DESFIRE cards, ISO/IEC 14443-4 cards such as CD97BX, CD light, DESFIRE, P5CN072 (SMX), INNOVISION Jewel cards such as IRT5001 card, FELICA cards such as RCS_860 and RCS_854]
Built in PCB Antenna, with 5cm to7cm communication distance
Supports MIFIRE higher transfer speed communication at 212Kbits/s and 424 Kbits/s
Supported host communication: SPI Interface, I2C Interface and High Speed Serial UART
Flexible interrupt using IRQ pin
Hard reset with low power function
Power down mode per embedded firmware
Automatic wake up on HSU,I2C and SPI interfaces when device is in power down mode
Programmable timer
Contactless communication at 13.56MHz
On-board level shifter, Standard 5V TTL for I2C and UART, 3.3V TTL SPI
Work as RFID reader and writer
Work as RFID card or a virtual card
Operating voltage: +2.7V to +5.5V
On-board level shifter: Standard 5V TTL for I2C and UART, 3.3V TTL SPI
Low power modes: Hard-Power-Down mode (1µA typical), Soft-Power-Down mode (22µA typical)
Operating temperature: -30ºC to +85ºC
Datasheet

PN532 NFC Pinout Configuration:

Schematic Diagram:

For Ex with Arduino:

Select SPI mode:

SEL0	SEL1
L	H

Connect the module and the Uno board:

PN532 Module	Arduino
GND	GND
5V	5v
SCK	2
MOSI	3
SNN	4
MISO	5

Document:

Lib+Ex PN532

2D-Model:

Sản phẩm liên quan

RX480E Module thu sóng RF học lệnh 433MHz

Bán lẻ: 30,000₫

Mạch thu RF 315Mhz học lệnh

Bán lẻ: 31,000₫

E01-2G4M13S Module thu phát NRF24L01 2.4Ghz

Bán lẻ: 115,000₫

E01-ML01DP4 Module thu phát NRF24L01 2.4Ghz

Bán lẻ: 85,000₫

E01-ML01SP2 Module thu phát nRF24L01P 2.4Ghz

Bán lẻ: 90,000₫

E01-ML01IPX Module thu phát NRF24L01 2.4Ghz

Bán lẻ: 80,000₫

E01-ML01DP5 Module thu phát RF 2.4GHz 100mW

Bán lẻ: 147,000₫

Điều khiển RF 433MHz tự học mã ABCD

Bán lẻ: 36,000₫

Module RFID RC522 Mini

Bán lẻ: 48,000₫

RDM6300 Mạch đọc RFID

Bán lẻ: 65,000₫

Module thu phát NRF24L01+PA+LNA 1100m

Bán lẻ: 50,000₫

Module RF 433M SI4432

Bán lẻ: 81,000₫

Module bộ thu phát RF 315Mhz

Bán lẻ: 26,000₫

Mạch thu RF 315Mhz-433 PT2272-M4 + Điều khiển 4 kênh

Bán lẻ: 58,000₫

Module RFID RC522 NFC 13.56Mhz

Bán lẻ: 33,000₫

Module thu phát NRF24L01 2.4G

Bán lẻ: 20,000₫

Module THU PHÁT RF 433MHZ 1KM SPI CC1101

Bán lẻ: 80,000₫